Naar de inhoud
Muziekhuis Lyana Lyana Music for you

Niets gevonden voor “”

Bel 046-4333227 — we hebben vaak méér in huis.

Laden…

Tama HT230 Drumkruk

Stevige drumkruk met spindel en dubbele pootjes.

• 13″ Diameter, 90mm (3 1/2″) Thick Round Seat
• Double Braced Legs
• Weight: 3.4kg (7.7lbs)
• Height Adjustment Range: 445mm – 620mm (17 1/2″ – 24 7/16″)

Tama HP600DTW Iron Cobra Dubbel basdrumpedaal

Iron Cobra 600 Twin Pedal Duo Glide

Twisiting springs severely reduce pedal smotthness. Spring Tight, a clever half-moon shaped spring tension rod, keeps the spring from twisting so there’s never any loss of power transmission.

The new Duo Glide cam makes it easy to switch between the Power Glide cam, which increases power and speed during a pedal stroke, and the Rolling Glide cam, which provides a smooth, consistent feel throughout the stroke.

The Iron Cobra 600 series features the same durable double chain drive as the Iron Cobra 900 series. This double chain drive offers smooth and accurate motion in any situation

This new hinge uses a tough, cylindrical brass sleeve to protect the hinge pin from damage or undo pressure, assuring fluid motion and increased durability.

The Iron Cobra 600 series eliminates another source of friction by replacing the traditional nylon rocker cam with the Speedo-Ring, which has a high quality ball bearing built in.

As with Iron Cobra pedals, the head section of the hoop clamp rotates with the angle of the bass drum hoop so your Iron Cobra 600 series pedal stays flat on the floor.

Tama StageStar ST52H6-BNS (Meinl CYM set) Acoustisch slagwerk

ST52H6 (22″ basdrum 5-delige kit)

Shell kit met 6pc Hardware

22″x16″ Basdrum
10″x8″ Tom Tom
12″x9″ Tom Tom
16″x15″ Floor Tom
14″x5.5″ Snare Drum

Dubbele Tom Houder
Drumpedaal
Snarestand
Boom bekkenstandaard
Rechte bekkenstandaard
Hi-Hat Stand
Drumkruk

Incl: Cybmbal set van Meinl

Tama HP30TW Dubbel basdrumpedaal

Het “snelste” dubbel bass pedaal in z’n prijsklasse!

Met dezelfde offset cam-vorm als de Iron Cobra 900 Power Glide, biedt de HP30 meer vermogen en snelheid met een gemakkelijk instelbare klophoek – een functie die meestal wordt aangetroffen op top-of-the-line pedalen. Aangeboden met de DS30-klopper, kunnen twee verschillende geluiden worden bereikt door de klopkop te draaien: de vilten kant voor een zachter, gecontroleerd geluid, of de plastic kant voor een luider en pittiger geluid met meer attack.

Klopper hoek afstelbaar:
In deze prijsklasse vind je op de meeste pedalen geen instelbare kloppers/voetplankhoeken. Maar onze HP30 wordt standaard geleverd met een hoekaanpassingssysteem dat is gekoppeld aan de hoek van het voetbord.

Druk met veren afstelbaar

Power Glide
De HP30 single chain pedals gebruiken dezelfde offset cam vorm als TAMA’s best verkochte Iron Cobra Power Glide.

Gewicht: 3.42 Kg

TAMA HS60W Snaredrum stand

De Klassieke Snare Standaard

Details:

Geschikt voor snaredrums met een diameter van 12″ tot 15″.
Basisbuis met een diameter van 19,1 mm.
Enkel verstevigde statiefpoten.
Klassieke stijl mand.
Dubbel verstevigde armen.
Traploze kantelverstelling.
Geheugenvergrendeling.
Gewicht: 1,7 kg (3,11 lbs).
Hoogte verstelbaar van 390 mm tot 580 mm (15 3/8″ – 22 7/8″).

Tama HH205 HiHat stand

Iron Cobra 200 Hi-Hat Standaard
Details
• Directe trekactie
• Dubbel verstevigde poten
• Draaibare voet
• Spanningsstang die niet losraakt
• Teenbeschermer
• Beveiligingsklem
• Gewicht: 3,8 kg (8,6 lbs)
• Hoogteverstelbereik: 670 mm – 930 mm (26 3/8″ – 36 5/8″)

Tama HP900RN Iron Cobra Basdrumpedaal

Iron Cobra 900 Single Pedal Rolling Glide

De only pedal you ever need!
Een stabiel en snel pedaal met veel afstelmogelijkheden. Incl. stevige case.

Vari-Pitch beater angle adjustments are completely independent of the footboard angle. The Speedo-Ring allows you to adjust the angle of the footboard link independently of the beater angle. The combination of the Speedo-Ring and the Vari-Pitch offer a range of incremental adjustments that will satisfy any style.

The conventional approach to the spring assembly has been to anchor the bottom of the spring while the top of the spring is being pulled from various angles throughout the pedal’s cycle. But a spring being pulled on at an angle represents wasted energy and causes turbulence. The Swivel Spring Tight assembly solves this problem, recapturing that lost energy and optimizing smoothness through the use of a contoured assembly that allows the base to swivel freely with the spring. This enables a straight spring pull during the pedal’s entire cycle, resulting in the smoothest, lightest action ever found on a bass drum pedal.

We’ve changed the construction of the Bearing Hinge on the footplate from a one-piece assembly to two pieces, which holds the bearing more evenly?minimizing stress, and maximizing smoothness, while adding to the pedal’s sense of power.

To reinforce durability, the Iron Cobra 900 Series features a thicker 6 mm diameter shaft. Oiles® bearings create far less friction than standard ball bearings. They also eliminate unwanted side-to-side motion while providing superior durability. (Oiles® bearings is a registered trademark of the Oiles Co., Ltd.).

TAMA eliminated another source of friction by replacing the traditional nylon rocker cam with the Speedo-Ring, a rocker cam with a high quality built-in ball bearing rocker. The Quick-Hook not only allows for easy setup and tear-down but also streamlines the pedal, allowing quick stowaway in the hard case without removing the beater.

Quick-Hook not only allows rapid spring attachment and reattachment for rapid set up and tear down, it also eliminates wobbling and allows maximum power transmission to the Speedo-Ring. And you never have to worry about it slipping off during performance.

TAMA now introduces Para-Clamp II -an even more clever and useful version of the popular original. The Para-Clamp II is capable of gripping the widest variety of bass drum hoops ever. The improvement is largely due to its newly designed three-dimensional rubber grip. Holding power is increased and the possibility of scratching the hoop is eliminated. Furthermore, set-up and breakdown are easily facilitated, while sitting on a throne because the T-bolt of the Para-Clamp II Pro is on the side of the footboard, rather than under it.

Tama HC63BW Cymbal – Boomstand combi

The HC63BW is a sturdy, double-braced boom cymbal stand. It features the Roadpro Quick-Set tilter which allows easy positioning of cymbals at virtually any angle.

Boom Cymbal Stand
Details •25.4mm diameter base section tubing
•Double braced legs
•Boom/Straight convertible tilter
•Boom arm length : 400mm (15 3/4″)
•Quick-set tilter
•Boom Arm Length: 400mm (15 3/4″)
•Weight: 3.9kg (8.9lbs)
•Height Adjustment Range: 850mm – 2,010mm (33 1/2″ – 79 1/8″)